BAL Variset XP - Polymer-modified controllable-setting, water and frost-resistant cementitious tile adhesive for walls and floors. Use for Fixing ceramics, porcelain and vitrified tiles, mosaics, certain natural stone including marble (excluding translucent), terrazzo, rigid foam insulating materials and brick slips in dry or wet interior and exterior environments. NOTE: Certain types of natural stone (i.e. limestone, marble, travertine and some granite) may be susceptible to staining. In this case, use of a BAL rapid-setting white adhesive is recommended. Do NOT use Rapidset for translucent marble. Recommended for swimming pools/total immersion areas/showers. Also suitable for installations subject to limited movement and vibration and heated screeds. Restrictions: NOT suitable for Metal, painted or glazed surfaces, including existing tiling. PRODUCT INFORMATION Composition: Highly polymer-modified cement-based powder. Colour: Grey Type/Classification: Exceeds BS EN 12004 C2F Pack sizes: 20kg (powder) and 5 x 1ltr (liquid) Key features: Allows user to control setting times based on room/site temperature (see guide). Ideal for fast-track tiling (can set from 20 mins). Highly flexible. Enhanced adhesion to fully vitrified/porcelain tiles and low porosity substrates. Highly water/frost-resistant. Non-slip. Grout after: As required after the adhesive has set (see table)
